Twentyfourseven | Technical solutions for TV, film, sport and event productions


	Located in Sweden, Norway, Denmark and Finland Phone Denmark +45-44-247 247

Rental

HDW-D2000
DECK AND VTR / HD
SONY

HDCAM video tape recorder with CineAlta record feature and MPEG IMX and Digital Betacam playback.

Overview	Features	Specification
A high definition VTR for prestige and mainstream programme production Sony recognises that your needs as a programme maker will vary depending upon the type of programme being made. This has driven the development of a multi-format high definition product offering, including HDV for entry-level HD operation, HDCAM for mainstream and prestige productions, CineAlta for 24P applications, and HDCAM SR for productions where only the ultimate quality will suffice. HDCAM recording and playback HDCAM uses intra-frame DCT compression using a compression ratio of about 7:1. There are four channels of 48kHz digital audio at 20-bit resolution. Selectable frame rates The HDW-D2000/20 can record and replay at 1080/50i, 1080/59.94i, 1080/25P, 1080/29.97P, 1080/23.98P and 1080/24P. Compatible replay of standard definition digital cassettes Both 625/50 and 525/50 MPEG IMX and Digital Betacam cassettes can be replayed. Built-in up and down converters The HDW-D2000/20 has a built in HD to SD downconverter and a built-in SD to HD upconverter. Downconversion allows tapes shot in HDCAM to be output in standard definition for subsequent post production or distribution. The downconverted image can be squeezed or cropped within the VTR for display on a 4:3 monitor. No compromise in editing performance Assemble, insert and pre-read editing is provided. When used in pre-read mode, the HDW-D2000/20 can be used to insert titles into video material using a single VTR. Broadcast quality slow motion The HDW-D2000/20 has DT (Dynamic Tracking) heads as standard. Broadcast quality pictures can be replayed in the range -1 to x2 speed from HDCAM tapes, and from -1 to x3 speed when replaying MPEG IMX and Digital Betacam cassettes. High quality picture search and jog Selecting edit points is easy with the HDW-D2000/20. Pictures and sound can be searched at up to x50 normal speed. Compact chassis The HDW-D2000/20 uses a 4U chassis design, in common with MPEG IMX VTRs and the new DVW-M2000P series Digital Betacam VTRs. Surround sound Both Dolby-E and AC-3 are handled as standard. Power Requirements: AC 100 V to 240 V, 50/60 Hz Power Consumption: 220 W Operating Temperature: +5C to +40C (+41F to +104F) Storage Temperature: -20C to +60C (-4F to +140F) Humidity: 25% to 90% (relative humidity) Mass: Approx. 23 kg Dimensions: 427 mm x 174 mm x 544 mm Recording Format: HDCAM (1080/50i, 59.94i, 25P, 29.97P, 23.98P, 24P) Replay Formats HDCAM (1080/50i, 59.94i, 25P, 29.97P, 23.98P, 24P) Digital Betacam MPEG IMX HDCAM Recording Duration Up to 155 minutes (48Hz) with L-cassette Up to 149 minutes (50Hz) with L-cassette Up to 124 minutes (59.94Hz) with L-cassette Up to 50 minutes (48Hz) with S-cassette Up to 48 minutes (50Hz) with S-cassette Up to 40 minutes (59.94 Hz) with S-cassette Video Input Signals Analogue reference 1 x BNC with loop through HD-SDI 1 x BNC (SMPTE 292M) 1.485Gbps SDTI (with optional HKDW-102 installed) 1 x BNC (SMPTE 305M) 270Mbps Video Output Signals Analogue composite 3 x BNC (one with character display) Analogue component 3 x BNC (Y, R-Y, B-Y) SDI 3 x BNC (one with character display) HD-SDI 3 x BNC (one with character display) SDTI (with optional HKDW-102 installed) 2 x BNC Audio Input Signals Analogue audio 5 x XLR 3-pin (CH 1 to 4 and CUE) Digital audio (AES/EBU) 2 x BNC (CH1/2 and CH3/4) Time Code 1 x XLR 3-pin Audio Output Signals Analogue audio 5 x XLR 3-pin (CH 1 to 4 and CUE) Digital audio (AES/EBU) 4 x BNC (CH1/2, CH3/4, CH5/6 and CH7/8) Time Code 1 x XLR 3-pin Monitor output 2 x XLR 3-pin Remote Control RS-422A IN/OUT D-sub 9-pin RS-232C D-sub 9-pin Video Control D-sub 15-pin, D-sub 9 pin Control Panel Round type 10-pin Parallel Remote D-sub 50-pin